How many pounds of flakes per square foot?

Short answer

About 0.10–0.20 lb per square foot for a full broadcast, depending on chip size: 1/4 in chips at 1 lb per 8 sq ft come to 12.5 pounds per 100 square feet, and 1/8 in chips about 20 lb. A partial broadcast takes only about 2 lb per 100 square feet.

How 100 sq ft works out

  1. 10 ft × 10 ft = 100 sq ft
  2. 100 sq ft × 0.125 lb/sq ft = 12.5 lb; + 0% = 12.5 lb
  3. 12.5 lb ÷ 40 lb per box = 0.31 → 1 box

Flake rates are published two ways — pounds per square foot, or square feet per pound — and both appear on supplier pages. This page converts them to pounds per 100 sq ft, with no allowance added, so you can scale to any floor: multiply by your square footage ÷ 100, then add 10–15%.

Adjust for your project

ft
Wall to wall. Skip areas under cabinets you won’t move.
ft
Full broadcast: chips thrown until the wet coat can’t hold any more, so no base color shows. Smaller chips pack tighter and weigh more per sq ft. The rate used appears in the result.
lb
Chips are sold by weight — commonly 10, 20, 25 or 40 lb. Full floors are usually bought in 40 lb boxes.
More options: waste 0%
%
Chips land unevenly; first-timers throw more than they plan
$
Optional — an example; enter your supplier’s price for one box of the size above.
Flakes to buy (by weight)12.5 lb5.67 kg
Boxes of chips
1 box
Floor area
100 sq ft
Broadcast rate used
0.125 lb per sq ft (about 8 sq ft per lb)
Flakes before the allowance
12.5 lb
One box covers (before the allowance)
320 sq ft
Spare chips in the last box
27.5 lb
  • A full broadcast leaves loose chips on top once the coat cures. They’re scraped and swept off — keep the clean ones for touch-ups — and most flake floors then get a clear topcoat.

Next: gallons of base coat and clear topcoat for the flake system.

For this job · affiliate link
Decorative floor flakesAbout 13 lb of chips — 1 × 40 lb box. Buy one blend, in one order, so the color matches across the floor.
View on Amazon (opens in a new tab)

Pounds of flakes per 100 sq ft by broadcast and chip size (no allowance)

Pounds of flakes per 100 sq ft by broadcast and chip size (no allowance)
BroadcastFlakes to buy (by weight)Broadcast rate used
Partial broadcast2 lb0.02 lb per sq ft (about 50 sq ft per lb)
Full broadcast, 1/4 in chips12.5 lb0.125 lb per sq ft (about 8 sq ft per lb)
Full broadcast, 1/8 in or hybrid20 lb0.2 lb per sq ft (about 5 sq ft per lb)

Flake rates per square foot, per 100 and per 1,000 sq ft

From the supplier figures linked below, before any allowance for uneven throwing.
BroadcastPer sq ftPer 1,000 sq ft
Partial broadcastabout 0.007–0.025 lbabout 7–25 lb
Full, 1/4 in chips0.10–0.125 lb (8–10 sq ft per lb)100–125 lb
Full, 1/8 in chips or hybridabout 0.20 lb (5 sq ft per lb)about 200 lb

The spread for a full broadcast comes from chip size more than anything. Concrete Floor Supply plans 0.10 lb per sq ft for 1/4 in flakes — and calls that a minimum — and 0.20 lb for 1/8 in flakes and hybrid blends. WALT Tools plans about 8 sq ft per pound, the same as OneStopEpoxy’s 1 lb for every 8 sq ft of 1/4 in chips, and says real use runs anywhere from 5 to 10 sq ft per pound depending on chip size and how you throw. Legacy Industrial’s figure of about 90 lb per 500 sq ft (0.18 lb per sq ft) sits near the top of that range.

A partial broadcast is much lighter, and the published numbers vary more because it’s a look rather than a rule: OneStopEpoxy gives 5–10 lb per 400 sq ft, and Legacy Industrial about 1 lb per 150 sq ft. Throw a sample board at the density you want, weigh what you used, and scale from that.

To convert between the two styles of figure, divide 1 by the rate: 8 sq ft per lb is 0.125 lb per sq ft, and 0.20 lb per sq ft is 5 sq ft per lb. In metric, 0.125 lb per sq ft is about 0.61 kg/m². For a whole floor, see how many pounds of flakes for a 2 car garage or how many pounds of flakes for a 3 car garage.

What you’ll need

As an Amazon Associate we earn from qualifying purchases. Links to products are affiliate links — they cost you nothing extra and help keep these calculators free.

Frequently asked questions

How many pounds of flakes for 1,000 sq ft?

About 138 pounds of 1/4 in chips for a full broadcast with 10% extra — 4 boxes of 40 lb. With 1/8 in chips it is about 220 lb.

How many square feet does one pound of flakes cover?

About 8 sq ft for a full broadcast of 1/4 in chips, and about 5 sq ft with 1/8 in chips or a hybrid blend. As a partial broadcast, a pound covers roughly 40–150 sq ft.

Sources